TRIO NI-163 Features: Exclusive 3 fiber pins with a total of 5 feet of light gathering fiber 2 1/4" large aperture 1/4" elevation adjustment on top and bottom pins Designed for fast bows

Click for larger view

Instructions for the installation and adjustment of the Trio Sight:

Please read these instructions carefully before beginning.

1. Mount the sight aperture bracket to the middle of the windage bracket.
2. Mount the assembly from step 1 to the bow mounting bracket.
3. Mount the final assembly to the bow using the two mounting screws.
4. Adjust the windage bracket so that the sight pin is located 1/8" left of center shot (for right handed bows).

Adjustment of the Trio Sight:

1. Get close to the target and shoot the first arrow.
2. If you desire 20, 30 and 40 yardage settings, basic setup is necessary.
3. Begin by setting the top pin at approximately 20 yards. To do this, set the top pin to the middle position. Adjustment is accomplished by moving the entire aperture either up or down for elevation and left or right for the proper windage.
4. Once the 20 yard setting is accomplished, you will then set the 30 yard pin by again moving the aperture up or down.
5. Return to the 20 yard target and re-adjust the top sight pin. This can be accomplished by loosening the screw at the base of the pin and moving it either up or down.
6. Move to the 40 yard target and adjust the bottom pin by loosening the screw and moving the pin either up or down.