• State-of-the-art electronic system
  • 3 levels of light intensity
  • Push button pin selection
  • Auto shut off
  • Machined aluminum & Polycarbonate construction
  • Water Resistence
  • Patent no. 6494604



Selector NI-120 Sight Instructions

Please read all instructions before starting.

  1. Depress the push button & hold until pins turn on ( 1 _ sec).
  2. Bump the push button to select the brightest level (4 levels).
  3. Depress & hold push button for more than 1 second, but less than 2 seconds to select the pin you want to have lighted. First, all pins turn on, then only the top pin, next only the middle pin, then only the bottom pin and finally all three pins.
  4. Depress and hold push button over 2 seconds to turn off.
  5. The unit is programmed to automatically shut itself off after 2 hours of inactivity.
  6. To replace batteries, use a coin to unscrew slotted battery cover, place 2 new #393 Batteries with the negative (-) end first and replace cover.

Note: There are 2 spare #393 batteries included in bottom of sight housing.



2007 Impact Archery • Website by Maxam Design